Regulator Adapter Step
Regulator Adapter Step
How to choose an Toshiba PA3467U-1ACA adapter.
Before purchasing Toshiba PA3467U-1ACA AC Adapters you need to make sure make the PA3467U-1ACA AC Toshiba Adapters will give you the correct voltage and suitable current output. To find out the voltage & current, turn your laptop over and look for a label, sticker or writing which shows the voltage and current, it should look something like the examples below.
The voltage figure will have a “V” after the number i.e 19V and the current will have a “A” or “mA”. i.e 3.15A. You can also find these shown on your original Toshiba AC Adapter PA3467U-1ACA if you have it. The Voltage must be within 10% of your original Toshiba PA3467U-1ACA s Voltage. The Amps may be higher but they cannot by lower.
If you are purchasing a universal PA3467U-1ACA AC Adapter or Car Charger you will need to work out the Watts of your original Toshiba PA3467U-1ACA Adapter and select the universal Toshiba PA3467U-1ACA AC Adapter or Car Charger with the same Watts or next highest Wattage.
You can work out the Wattage by multiplying the Voltage by the Amps i.e 20V X 3A = 60 Watts. There is no 60 Watt Toshiba PA3467U-1ACA AC Adapters so you will need to select the next step up which is the 70 Watt Toshiba PA3467U-1ACA AC Adapter.It is possible to substitute a regulated adapter for an unregulated one (the downside being added cost), but it is not advisable to substitute an unregulated adapter in place of a regulated adapter as this could cause the electronic device being powered to fail.
Determine the size of the Toshiba PA3467U-1ACA adapter plug. Plug sizes are normally measured in millimeters.
If the plug size is the only thing wrong with an Toshiba PA3467U-1ACA adapter, meaning that its voltage and current ratings, whether it is regulated or unregulated, and its polarity all match, it is possible to splice a new plug onto the adapter, as many electronics stores do sell just the plug in different sizes. However, care must be taken to ensure that the new plug maintains the same polarity as the old one, meaning that the wire that connected to the outside surface of the old plug still connects to the outside of the new plug, and that the wire that connected to the inside surface of the old plug still connects to the inside surface of the new plug.
Determine the desired output specifications of the Toshiba PA3467U-1ACA adapter. This can usually be found on the old adapter, the electronic device, or the instruction manual of the electronic device. There are two components to this: the voltage, measured in volts, and the current, usually measured in milliamps (ma). When selecting an adapter, you will want to match these as closely as possible.
If an exact match is not available, it is better to err on the side of the new Toshiba PA3467U-1ACA adapter having a lower voltage and higher current than the specifications require. For example, if the device calls for 6 volts at 500 ma, it is preferable for the new adapter to provide 5 volts at 600 ma (lower voltage, higher current) than it would be for the new adapter to provide 9 volts at 333 ma (higher voltage, lower current), as the excess voltage could damage the electronic device.
About the Author:
Laptop Parts – Laptop Battery, Laptop AC Adapter, Laptop Keyboard, LCD Panel.
Article Source: ArticlesBase.com – How to choose an Toshiba PA3467U-1ACA adapter